下面為大家介紹升降平臺安全操作注意事項，相信可以幫助到大家提高操作升降平臺的安全，下面一起來看一下吧。Following for us to introduce the Shijiazhuang platform for the safety of the lifting platform, we believe it can help to improve the safety of the operation of the Shijiazhuang platform, the following look at it.

1.使用升降平臺禁止出現(xiàn)貨物高空墜落到搬運車上面的情況。要堅決杜絕將貨物從高處扔下，直接落至升降平臺貨叉上的情況，不但對貨物和貨叉造成了傷害，還使搬運的過程中增加了危險性。The use of Shijiazhuang lifting platform to prohibit the emergence of cargo falling to the top of the handling car. We must resolutely put an end to the goods dropped from high, directly down to the landing platform goods fork, not only to the goods and goods fork caused damage, but also make the process of handling increased risk.

2.不得使用升降平臺裝載不穩(wěn)定的貨物。搬運貨物，一定要注意將貨物捆綁牢靠或者包裝結(jié)實，再放在升降平臺上面進行搬運，否則一定會造成搬運途中貨物傾翻、掉落等情況，影響搬運的效率、影響貨物的完好。Shall not use the Shijiazhuang lifting platform to load the goods. Handling of goods, we must pay attention to the goods or tightly packing is strong, put in Shijiazhuang lifting platform above handling, or will cause the transported goods tipping, drop and so on, affect the handling efficiency, the goods in good condition.

3.高物低載使用升降平臺，要注意盡量將貨叉放低。在用戶使用手動液壓搬運車進行高物低載搬運過程中將貨叉放到盡量低位置，以免貨物摔落。Shijiazhuang high and low load using the lifting platform, should pay attention to the fork as far as possible to put low. In the user to use the Shijiazhuang manual hydraulic transport vehicle carrying the goods in the process of carrying on the low load to carry the goods fork to try to lower the position, in order to avoid the goods falls.

4.請注意保持操作人員與升降平臺部件的距離防止受傷。不管是操作中的搬運車，還是停放中的升降平臺，非專業(yè)工作的人員請勿將身體部位隨意的放在搬運車上的某部件上，如機械提升部件附近、所載貨物上以及貨叉下方等，這種行為與您是一種非常危險的事情。Please note that the operator and the Shijiazhuang lift platform components to prevent injuries. Whether it is operating in the van parked in the lifting platform or the non professional staff should not be a component part of the body laid in the van on, such as mechanical lifting parts, near cargo and fork below, this behavior with you is a very dangerous thing.